Engineered Power for Oil & Gas
SINTAQA designs, deploys and operates mobile and turnkey power systems that keep production running. We combine rental agility with deep engineering to cut lead time, lower cost and raise reliability across the GCC.
- Segments: upstream, midstream and downstream
- 3
- GCC countries served from Dubai
- 6
- Plus rental models to lower total operating cost
- PPA · BOOT
- Registered vendor; approved generator units, tanks and components
- ADNOC
01 — OUR APPROACH
You need an engineering partner, not a rental supplier.
We provide mobile, modular and turnkey power and energy services for oil and gas operations across the GCC. We combine rental agility with engineering depth to keep critical assets online in the most demanding environments.
In an industry where no two projects are the same, and where everything counts, we design, deliver and operate bespoke solutions that support your assets from construction, start-up and testing through production, maintenance and decommissioning: upstream, midstream and downstream.
02 — WHERE WE WORK
Where we support oil and gas operations.
Upstream
Drilling, production and remote field facilities, including flare-gas-to-power for captive loads.
Discuss a upstream project
Midstream
Pumping, compression and processing sites, temporary power during construction and commissioning.
Discuss a midstream project
Downstream
Refineries, tank farms and petrochemical facilities, including power during planned shutdowns.
Discuss a downstream project03 — HAZARDOUS AREAS
Zone 2 generators, certified per unit.
SINTAQA supplies containerised diesel generators converted for Zone 2 hazardous areas, where an explosive gas atmosphere is not expected in normal operation but may occur for short periods: well sites, processing and compression facilities, refineries and tank farms.
SINTAQA 1,250 kVA generator units can be converted for Zone 2 applications using the required certified safety components and project-specific modifications. Certification and documentation are prepared for the converted unit in accordance with the applicable project and client requirements. Standard fleet units are not delivered as Zone 2 by default; conversion is project-specific. Certified SINTAQA units have already operated on client sites. A Zone 2 conversion includes:
- ATEX- and ADNOC-approved air intake shutoff valve (Chalwyn D-series, II 2G Ex h IIB T3 Gb) that closes automatically to stop engine runaway if flammable gas is drawn in with the intake air
- ATEX- and ADNOC-approved stainless steel 316L exhaust spark arrestor (Chalwyn, EN 1834), approved for Zone 1 and Zone 2 hazardous areas
- ATEX product certificates for the fitted components, and an ATEX certificate issued for the converted unit
Certified per unit
The ATEX certificate is issued for the specific generator you receive, not for a type or a brochure.
ADNOC: vendor and equipment
SINTAQA is registered as a vendor with ADNOC. ADNOC-approved generator units are available for applicable ADNOC projects. ADNOC-approved fuel-tank configurations are available. ADNOC-approved components are used where required by project specifications.
Fleet convertible
Any relevant SINTAQA 1,250 kVA unit can be converted for Zone 2 for a project. Units are not delivered as Zone 2 by default.
Approved components
ADNOC-approved shutoff valves and spark arrestors from Chalwyn (AMOT, UK), widely used in the oil and gas industry.
What is a Zone 2 generator?
A Zone 2 generator is a generator adapted and certified to run in a Zone 2 hazardous area, where an explosive gas atmosphere is not expected in normal operation and would only be present briefly. An air intake shutoff valve stops the engine running away on ingested gas, and an exhaust spark arrestor stops hot particles leaving the exhaust.
| Component | Function |
|---|---|
| Air intake shutoff valve | Runaway protection: closes if flammable gas is drawn in with intake air |
| Exhaust spark arrestor | Controls the ignition risk from hot exhaust particles |
| Certification and documentation | ATEX product certificates for the components and an ATEX certificate for the specific converted unit |
Full details, zone definitions and what the site operator needs to confirm: Zone 2 generator rental.
04 — OUTCOMES
Power solutions for oil and gas.
Meet performance targets on time and on budget
Optimise production and process stability
Reduce carbon intensity via diesel-to-gas conversions, flare-gas-to-power and hybrid integrations
Lower total operating cost through PPA, BOOT and rental models
Cut lead times with containerised, plug-and-play packages and standardised interfaces
Minimise downtime using remote monitoring, predictive maintenance and fast-swap spares
Maintain HSE excellence in line with regional and client standards, using ADNOC-approved generator units, fuel-tank configurations and components where required
Perform reliably in harsh onshore and offshore conditions
05 — THE TEAM
An engineering-led team
By partnering with SINTAQA, you gain an engineering-led team with domain expertise, regional project experience and the tools to execute, from power plant design and integration to commissioning and long-term O&M.
We invest in technology and people so you get efficient, reliable equipment and skilled specialists to implement it: modern gas and diesel fleets, hybrid and storage options, advanced controls and SCADA, transformers and switchgear, and continuous performance oversight.
SINTAQA – engineered power, delivered.
Discuss your oil and gas project
Share the site, required power and schedule. Our engineers will come back with a configured solution.